EN

Products

  • Paver Control Panel

    Short Description:

    The paver control panel is the heart of an asphalt paver, consolidating all controls onto a single interface to streamline operation. Located on the side and rear of the paver, the control panel allows operators to monitor and adjust all paving functions including steering, material flow, screed, augers, and temperature.


    inquirydetail

  • Asphalt Paver Screed Bottom Plate Assembly including Heating Rods Screed Plates and Tamper Bars

    Short Description:

    The screed bottom plate, along with the main screed plate assembly, makes up the screed plate assembly on an asphalt paver. The screed bottom plate attaches to the underside of the main screed plate and together they help level, smooth, and compact asphalt material as it leaves the paver.


    inquirydetail

  • Driving Shaft Assembly for All Famous Brand Asphalt Pavers

    Short Description:

    The asphalt paver driving shaft provide an optimal guide of the conveyor chains. It is the driving mechanism for the conveyor chains with scrapers to operate longitudinally for conveying the asphalt mix during the operation of the paver.


    inquirydetail

  • GP Bucket for General Duty Work

    Short Description:

    Crafts excavator general purpose bucket is made of normal standard thickness steel plate, and there is no obvious reinforcement process on the bucket body. It is designed from 0.1m³ to 3.21m³ and is available in all widths for 1t to 50t excavators. Large opening size for large pile loading surface, general purpose excavator bucket has the advantages of higher filling coefficient, high work efficiency, and low production cost. Crafts own design general purpose bucket is able to transmit your excavator digging force better, meanwhile, each excavator brands’ original designs buckets and OEM service are all available for your choice. According to the work condition, there are also three other weight classes available for Crafts excavator buckets: heavy duty bucket, extreme duty bucket and ditching cleaning bucket.


    inquirydetail

  • Durable Bottom Rollers & Top Rollers for Tough Construcion and Mining Tasks

    Short Description:

    Crafts track rollers and carrier rollers are according to the standard of OEM to manufacture. The main pin shaft of our roller is made by round steel, and the shell are forged by special steel. Both of the shaft and the shell are hardened by the heat treatment deep to 6mm and up to the HRC 56° around, to make sure they are hard enough to cover the bad work condition.


    inquirydetail

  • Undercarriage Parts for Asphalt Paver & Road Milling Machine

    Short Description:

    The asphalt paver and road milling machine undercarriage parts include track chain, sprocket, idler, track adjuster, track rollers, carrier rollers, rubber track pads. These parts work together to allow the paver to move along a job site and support the weight of the entire machine during operation.


    inquirydetail

  • Asphalt Paver Averaging Beams & Ski Sensors

    Short Description:

    Asphalt pavers use sophisticated electronic sensors to precisely control mat thickness and contour during paving. Two key components are averaging beams and ski sensors. Averaging beams employ ultrasonic or sonic sensors to measure the height of the asphalt mat behind the screed. 


    inquirydetail

  • Durable Track Pads for Long-lasting Paver Use

    Short Description:

    Crafts supplied rubber pads for asphalt paver, and polyurethane pads for road milling machine.

    The rubber pads for asphalt paver are divided into 2 types: integrated type rubber pads and the split type rubber pads. Crafts rubber pads are made from natural rubber mixed with a variety of specialty rubber, which bring our rubber pad many advantages such as good wear resistance, hard to fracture, high temperature resistance.


    inquirydetail

  • Rock Bucket for Heavy Duty Work

    Short Description:

    Crafts excavator heavy duty rock buckets takes thicker steel plate and wear resistant material to reinforce body such as the main blade, side blade, side wall, side reinforced plate, shell plate and rear strips. In addition, the heavy duty rock bucket takes the rock type excavator bucket teeth in stead of standard blunt type for better penetration force, meanwhile, replaces the side cutter into the side protector to withstand the impact and the wear for the side blade.


    inquirydetail

  • Reliable Traction with Crafts Rubber Tracks and Rubber Pads for Long-lasting Use

    Short Description:

    Crafts rubber tracks are composed by steel core, steel wire and rubber via vulcanization.

    The steel core is the main parts to bear the pression of the machine. It is made by forging. And before the vulcanization, the steel cores surface would be cleaned by shot blasting and ultrasonic cleaning, then they would be applied special glue to make sure they will be sticked together with the rubber strongly. Steel wires supply the tension to keep the rubber track always at the specified length, to make sure the rubber track will be not stretched due to the long-term work or any other reason. The rubber for the rubber track is the most important part.


    inquirydetail
Products categories
Recommended News
Hit enter to search or ESC to close

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

  • captcha