Rubber tracks are an essential part of a variety of construction and agricultural equipment. However, their longevity and effectiveness depend on their correct measurement. Accurately measuring your rubber tracks ensures that you purchase the correct size and length for your equipment.
In this guide, we'll walk you through the steps needed to measure rubber tracks easily and accurately.
Step 1: Check the width of the track
The first step in measuring a rubber track is to determine its width. To do this, use a tape measure or ruler to measure the distance from the outside of one track to the outside of the other. This measurement is also known as the center-to-center distance. Be sure to measure at the widest point of the track.
Step 2: Measure the spacing of the tracks
The pitch measurement is the distance between the centers of the two pins, which are usually in the center of the track. To measure it, place a ruler in the center of one pin and measure to the center of the next pin. Make sure to measure the distance on a straight line.
Step 3: Check the length of the track
The third step in measuring a rubber track is to determine its length. First, use a tape measure to measure the inside length of the track. Start at the inside end of the track and measure to the end on the opposite side. Next, you should confirm the total length by measuring the outside of the track. To do this, measure from the edge of one end to the other.
Step 4: Assess link count
The number of connecting rods is equal to the number of pitch rod pairs on the rubber track. To determine this number, divide the inside length of the track by the pitch length you measured in step two. For example, if the inside length of the track is 50 inches and the pitch length is 4 inches, the number of links would be 12.5. In this case, you can round up to 13, since there are no fractions in the track length.
Step 5: Measure Lug Height
Lug height refers to the overall height of the track. However, since not all track shoes have the same lug height, it is critical to measure this parameter to ensure you are getting the correct size. To achieve this measurement, use a ruler to determine the distance from the bottom of the shoe to the tip of the lug.
In conclusion
Once you know how to measure your rubber track correctly, you can buy a new one with confidence. With this guide, you're sure to get the right size and length for your equipment. The right track not only improves performance and efficiency, but also protects all elements of the machine for a long life.
Now that you know how to measure rubber tracks, you can start finding the perfect replacement for your equipment. However, if you are unsure about your measurements, you can always seek professional advice. They can provide personalized advice tailored to your specific needs.
Post time: Apr-06-2023